Description

Speaker cable 2.5mm 100m

Speaker cable 2.5mm 100m  is a 100-metre long roll of speaker cable with a conductor cross-sectional area of 2.5 mm² per conductor (usually two conductors: + and -) intended for use in installing speakers in venues, halls, schools, stages, etc. The larger 2.5 mm² size allows for longer runs with less signal loss compared to thinner cable. For example, one product description: “SPEAKER CABLE 2×2,5mm (100m)… Cross sectional area: 2,5 mm².

 Key Features

• Length: 100 metres — sufficient for wiring a full venue or multiple speakers in one run.

• Conductor size / area: 2.5 mm² per conductor (or approximately) — gives better current capacity and lower resistance for longer speaker runs.

• Two-core cable (2 conductors): Generally one conductor for positive, one for negative (for each speaker channel).

• Stranded copper / good conductor material: Many cables specify high purity copper (or oxygen-free copper) for better signal integrity.

• Insulation / jacket quality: Designed for installation use — outer sheath protects the conductors, often suitable for wall/ceiling runs. Example: some cables use LSZH (low smoke zero halogen) jacket for safety in public installations.

• Polarity/marking: Usually one conductor is marked (striped, coloured) so you can maintain correct polarity when wiring speakers.

• Suitable for moderate to long runs: Because of the 2.5 mm² size, the cable can handle moderate